How Much Does a Paver Patio Cost in Delaware & Maryland?

Most paver patios in Delaware and Maryland cost between $20 and $35 per square foot installed, which puts a typical 400 square foot backyard patio in the $10,000 to $17,000 range. Premium natural stone like travertine or bluestone runs higher, simple concrete paver projects can come in lower, and features like fire pits, seating walls, and outdoor kitchens add to the total. Here is how the numbers break down, and what actually moves the price up or down.

Paver Patio Cost by Material

The single biggest cost decision is the surface material. As of 2026, here are the typical installed ranges we see across Delmarva:

• Concrete pavers: $20 to $35 per square foot. The workhorse of the industry. Brands like Nicolock offer shapes, colors, and faux natural stone finishes at a fraction of real stone pricing.
• Brick pavers: $25 to $40 per square foot. A classic look that suits historic homes in towns like Berlin and Lewes.
• Natural stone: $35 to $60 per square foot. Travertine, bluestone, slate, and limestone. The premium option for pool surrounds and high-end outdoor living spaces.
• Permeable paver systems: add roughly 15 to 25 percent. The layered aggregate base costs more to build, but in towns with strict impervious coverage limits, permeable pavers are often the difference between the patio you want and a smaller one.

Every project is different, and these ranges are a starting point, not a quote. Site conditions, access, and design complexity all matter, which is why we price every project with a free on-site consultation rather than a formula. If you have seen lower numbers on national cost estimate sites, keep in mind those averages skew toward simple inland projects. Coastal work built on a proper base with the right materials runs higher, and it lasts.

What a Typical Project Costs

• Small patio, around 200 square feet: $5,000 to $9,000. A dining table and grill zone behind a beach cottage or townhome.
• Mid-size patio, around 400 square feet: $10,000 to $17,000. The most common project we build, with room for dining and lounging zones.
• Large or multi-feature projects, 600 square feet and up: $25,000 to $75,000 and beyond. Multi-zone layouts with seating walls, fire features, outdoor kitchens, or a pool surround, designed and built as one cohesive space.

Popular add-ons and their typical ranges: a gas or wood burning fire pit adds $3,000 to $10,000 depending on how custom the build is, seating walls typically run $4,000 to $12,000, and a full outdoor kitchen starts around $15,000 and climbs with appliances and stonework.

What Drives the Price Up or Down

Site preparation and drainage. Delmarva’s sandy soil digs easily, but it demands a properly compacted base and smart drainage planning. Corners cut here are why cheap patios fail in three years.

Demolition. Tearing out an old concrete slab or failing patio before the new build adds cost. You can see examples of this work in our demolitions and repairs gallery.

Access. A wide-open suburban backyard in Millsboro is a different job than a tight lot in downtown Bethany Beach where every pallet of pavers gets moved by hand.

Coastal requirements. Beach town lot coverage rules, HOA architectural guidelines in planned communities, and salt-rated material choices all shape coastal projects. We design within those constraints every week.

Design complexity. Curves, inlays, borders, multiple levels, and custom patterns take more cutting and more labor than a simple rectangle. They are also what make a patio worth photographing.

Pavers vs. Poured Concrete

Poured concrete costs less up front, typically $10 to $18 per square foot, and we install both. But pavers earn the difference back over time. When a tree root heaves a paver patio or a utility line needs digging up, we lift the affected pavers and relay them invisibly. Cracked concrete is forever, or at least until you pay to replace the slab. For resale value and longevity in coastal conditions, pavers are the stronger investment.

Frequently Asked Questions

What is the least expensive way to get a paver patio?

A simple rectangular layout in standard concrete pavers, on an accessible site with no demolition. Skipping the base preparation is not a way to save money. It is a way to buy the same patio twice.

Do paver patios add home value?

Yes, and especially in this market. In beach communities where outdoor space drives rental income and resale appeal, a professionally built patio is one of the highest-visibility improvements you can make.

Do I need a permit?

It depends on your town and HOA. Some municipalities regulate impervious coverage, and most planned communities require architectural approval. We handle those requirements as part of the project.

How long does installation take?

Most patios take three to seven days on site once work begins, with larger multi-feature projects running longer.

Get a Real Number for Your Backyard

Ranges are useful for planning, but your backyard is not a range. Above Grade, Inc. provides free on-site consultations across Delaware and Maryland, from the beach towns of Sussex County to Salisbury, Berlin, and Easton on the Eastern Shore. We will look at your site, talk through your design and budget, and give you a real quote for custom patio installation, not an estimate from a formula. Contact us today to get started, or browse our gallery to see what your budget can build.